"Pokémon Go Plus Modifications"

#PokemonGO: I just finished modifying my Pogo+ and thought I would post it since I haven't seen much of these things around here.I got one of those fancy skins, only to find that after a day of use it started to peel. I decided to paint it with clear nail polish. In hindsight, I should have just used modeling clearcoat or something. Apparently nail polish stays soft for like ever, and loves fingerprints. I may end up removing the polish and skin and just paint the damn thing, not sure.After watching several Japanese YouTube videos without words or subtitles (Cant speak or read it) I was able to figure out exactly how to wire the POGO+ to auto catch. Those components are SMALL! hardest soldering I've done, and somehow I managed to do it without smoking the board!I wanted the ability to turn the Autocatch feature off, so I put a tiny switch in line, allowing me to go back to Semi Auto. It was terrible relocating everything to make room for that switch, I had to reverse the vibrating motor and remove the weight, then solder on a tiny replacement. After some cutting and adjusting, I managed to make a small switch hole on the front, and allow easy access.After so much abuse, the original screws were toast, so I melted in some nuts, and used 2 machine screws to hold the unit together.And here she is, clipped to my Fitbit.http://ift.tt/2kfZdMK else modding their Pluses? Show me what you got! via /r/pokemongo http://ift.tt/2kHuusP